65W/52V Open Frame Power Supply

Input Voltage Range：90VAC~264VAC
Input Rated Voltage Range：100VAC~240VAC
Frequency Range：47Hz~63Hz
Efficiency：≥90%
Leakage Current：input to output less than 0.25mA

Output:
Group Of Output：1
DC Voltage：52VDC
Default Output Current：0-1.25A
Temperature Coefficient：±0.03%/℃

Output Protection：
Over Power
Over Voltage
Over Current
Short Circuit

Environment:
Operation Temperature and Humidity: -20℃~65℃; 20%~90%RH No condensing
Storage Temperature and Humidity: -40℃~85℃; 5%~95%RH No condensing

Certification:
3C.CE.FCC.EMI/EMC

Safety And EMC Standard
Electromagnetic Interference: EN55022 Class A
Harmonic Current: IEC61000-3-2 class A equipment requirements
Electromagnetic interference Immunity: EN61000-4-2,4,5,6,8,11 ENV50204, class A heavy industry standard


Product Name	65W/52V Open Frame Power Supply
Model	HVT-OP65-52
Group of Output	1
DC Voltage	52V
Default Output Voltage @25℃	50.00-53V （Vin：220VAC / LOAD：0A）
Output Rated Current	1.25A
Output Current Range	0-1.25A
Output Rated Power	65W
Total Peak Output Power	Up to 97W(Sustainable time 10S/220VAC)
Peak Output Current	1.875A( Sustainable time 10S/220VAC)
Ripple noise	0＜Ta≤65℃ P-P≤100mV; -20≤Ta≤0℃ P-P≤100mV
Output Regulation Range @25℃	47~54V
Stabilized Voltage Precision @-20~65℃	±2% (50.96V-53.04V)
Line Regulation @-20~65℃	±0.5%
Load Regulation @-20~65℃	±2% (50.96V-53.04V)
Temperature Coefficient @-20~65℃	±0.03%/℃
Output Start Time @25℃	≤2S /220Vac input, Full load)
Output Hold Time @25℃	≥10mS(220Vac input, Full load)
Voltage Overshoot @-20~65℃	≤5%
Input Voltage Range	90~264VAC
Input Rated Voltage Range	100~240VAC
Frequency Range	47Hz~63Hz
Starting Voltage @-20~65℃	90Vac
Efficiency @ 25℃	≥90%（230VAC FULL LOAD）
Input Current @25℃	＜1.5A
Inrush Starting Current @25℃	＜50A@220Vac Cold start
Power Factor @25℃	PF>0.6 (at full load)
Over Power Protection	78~97.5W Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode:Swing machine, Self-recovery after over-power released.)
Over Voltage Protection	57~70V Swing machine (Short circuit the Pin1-2 of U8, swing machine. Output recovery to normal after removing the short circuit) Note: Do not use external voltage.
Over Current Protection	1.5~1.875A Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode:Swing machine, Self-recovery after over-current released.)
Short Circuit Protection	It achieves the long-term short circuit by connecting a sufficient cross-sectional area copper cable (Length at 15cm±5cm) with power output port. Self-recovery to normal after removing the short circuit.
Operation Temperature and Humidity	-20~65℃; 20%~95%RH
Storage Temperature and Humidity	-40℃~85℃; 10%~95%RH non-condensing
Libration	Frequency range: 10 ~ 500Hz, Acceleration: 2G, Each sweep cycle 10min. Six sweeps along the X, Y, and Z axis
Surge	Acceleration: 20G, Duration time: 11mS, Three shocks along X, Y and Z axis
Altitude	2000m
Security Standard	GB4943/EN60950 ■Reference □Certification
Dielectric Strength	Input—Output:3KVac/10mA; Input--Case:1.5KVac/10mA; Output---Case:0.5KVDC/10mA Time for each testing is 1min.
Grounding Test	Test Condition: 32A/2min; Ground bond: ＜0.1 ohms.
Leakage Current @25℃	Input to GND ≤3.5mA; Input to output ≤0.25mA (Input 264Vac, 63Hz)
Insulation Resistance	Input-Output: 10M ohms; Input-Case: 10M ohms; Output-Case: 10M ohms;
Conducted Interference	EN55022, EN55024, FCC PART 15 CLASS B
Radiated Interference	EN55022, EN55024, FCC PART 15 CLASS B
Harmaonic current	EN61000-3-2 CLASS D
Conducted Emission	EN61000-4-6 Level3
Radiated Emission	EN61000-4-3 Leve3 criterion B
Power Frequency Emission	EN61000-4-8 Level3
Electrostatic Emission	EN61000-4-2 Level4 criterion B
EFT	EN61000-4-4 Level4 criterion B
Surge	EN61000-4-5 Level4 criterion B
Dip and Interruption	EN61000-4-11
Dimension / Weight	1005730mm / 0.13kg

Reviews

There are no reviews yet.

Be the first to review “65W/52V Open Frame Power Supply”

Contact Your Specialized Engineer

Reviews

Products

Solutions

About

Talk by Wechat