IPS50804FM-12V series full Gigabit Layer 2 managed PoE switches have 8 Gigabit LAN ports + 4 Gigabit uplink SFP optical slots, of which ports 1-8 support IEEE 802.3af/at standard PoE power supply, with a single-port PoE power of up to 30 W. As a PoE-powered device, it can automatically detect and identify standard-compliant powered devices and power them through the network cable. As a PoE power supply device, it can automatically detect and recognize powered devices that meet the standard and supply them with power through the network cable. It can supply power to industrial wireless AP, network camera, industrial control IP phone, PLC module, industrial sensors and other POE terminal devices through the network cable to meet the demand for high-density PoE power supply for industrial networking environment, suitable for intelligent transportation, rail transportation, electric power industry, mining, petroleum, shipping, metallurgy and green energy construction and other industrial scenarios to set up a cost-effective, stable and reliable communication network.

 IPS50804FM-12V is equipped with L2+ network management function, supports IPV4 static route forwarding, complete security protection mechanism, perfect ACL/QoS policy and rich VLAN function, easy to manage and maintain. Support a variety of network redundancy protocols STP/RSTP/MSTP (<50ms) and ERPS (<20ms) ring network protocol to enhance link backup and network reliability, when a one-way network failure, you can quickly restore communications to ensure uninterrupted communication of important transmissions. According to the actual application needs, through the Web, CLI, SNMP, Telnet and other network management methods, PoE power supply management, port flow control, VLAN division, QoS, LACP, IGMP and DHCP and other applications and services configuration. The switches are all made of aluminum alloy shell, super heat dissipation performance, to ensure that it can run stably for a long time in the outdoor high temperature environment, the service ports support 6KV electrostatic lightning protection, redundant dual power input interface, DIN-rail mounting, it is the best choice for you to set up a ring-type network and multi-service network access.

Installation Description

1. Incline the equipment upward, and use the snap ring at the upper end of the equipment buckle outside the DIN rail;

2. Press the device down and use the lower part of the clip to fit into the DIN rail

3 Check whether it is stable after fastening

• Product Features

  • Single-port PoE power up to 30W, af/at adaptive, widely compatible with a variety of network terminals;
  • Multi-optical port uplink port, long-distance transmission, suitable for a variety of ring/chain network cascade and expansion, networking is more simple;
  • Full Gigabit high speed transmission, stable and guaranteed high bandwidth transmission, support per port rate and flow control, realize 10M/250m long-distance transmission, easy to solve the problem of long-distance communication and power supply to meet different user needs;
  • Industrial-grade high-bandwidth switching chip, high backplane, large cache, reduce network congestion;
  • Support IEEE802.3X full duplex intelligent flow control, large bit stream HD transmission without lag;
  • Support MAC address automatic learning and updating, support port auto-flip (Auto MDI/MDI-X) function;
  • The service port supports 6KV anti-surge (lightning) protection, PoE short-circuit and overload protection, safer and more secure use;
  • Aluminum alloy profile metal shell, strong heat dissipation, shielding interference, solid, rust-proof and more durable;
  • Dual DC redundant power supply interface, DC12-36V wide voltage input, in line with the industrial environment wide voltage requirements;
  • DIN35 DIN-rail mounting, IP40 protection level, -40 ℃ to +75 ℃ wide temperature design, more stable and reliable in harsh environments;
  • Low power consumption, fanless silent design, easy to install and use.

   

  Software Features

  • Powerful business capabilities
  • Support 128 entries of IPV4 static routes, support ARP protocol, maximum 1024 entries.
  • Flexible port bandwidth and traffic configuration, optical port DDMI digital diagnostic function, easy to realize the fine management of the network.
  • Support IEEE 802.1Q VLAN, support protocol VLAN, support QinQ VLAN, users can flexibly divide VLAN according to demand.
  • Supports QoS, three priority modes based on port, 802.1P and DSCP, and four queue scheduling algorithms: Equ, SP, WRR, SP+WRR.
  • Supports ACL, which realizes the filtering of packets by configuring matching rules, processing operations, and time permissions to provide a flexible security access control policy.
  • Supports IGMP V1/V2 multicast protocol and IGMP SnoopingV1/V2/V3 to meet the needs of multi-terminal HD video surveillance and video conference access.
  • Supports STP/RSTP/MSTP production tree protocol and ERPS fast ring protocol to eliminate Layer 2 loops and realize link backup.
  • Supports static aggregation and dynamic aggregation (LACP), effectively increases link bandwidth, realizes load balancing, link backup and improves link reliability.

   

  Complete security features

  • Supports WEB interface user authentication.
  • Supports CPU protection to prevent attacks on the switch itself by large data streams.
  • Supports 802.1x authentication, remote RADIUS, TACACS+ authentication.
  • Hardware support IP ACL, MAC ACL, ACL port filtering function, MAC address binding, port-based IP+MAC+Vlan+port multiple binding function.
  • Support DHCP Snoopingv1/v2/v3 function, port isolation function, port broadcast storm suppression function.

   

  Convenient Operation and Maintenance Management

  • Supports Web-based network management, CLI command line (Console, Telnet), SNMP (V1/V2c/V3) and other diversified management and maintenance methods.
  • Support HTTP/HTTPS, SSH and other encryption methods, more secure management.
  • Support HTTP/TFTP to realize firmware update/upgrade, support configuration file upload/download, and one-key restore system configuration.
  • Supports RMON, system log, port traffic statistics for network optimization and transformation.
  • Supports LLDP, which is convenient for network management system to query and judge the communication status of links.
  • Support CPU monitoring, memory monitoring, Ping detection, cable detection.